Chinese Craft Stories NATIONAL HERITAGE INVENTORY
Home / Bearers / Roster record

Ge Caijin

Nanjing Gold Foil Forging CraftsmanshipTraditional CraftsmanshipNanjing, JiangsuBatch 6 (2025)

01 · Lineage & Regional School

Ge Caijin, Male, Han, from Nanjing, Jiangsu, is a sixth-batch national representative bearer of Nanjing Gold Foil Forging Craftsmanship (Ⅷ-36). The tradition is documented in Nanjing, Jiangsu. Within the regional tradition and school record of Nanjing Gold Foil Forging Craftsmanship in Nanjing, Jiangsu: The Nanjing gold leaf forging technique is concentrated in the Jiangning, Dongshan and Hexi areas, above all at Longtan. According to legend, Ge Xianweng (Ge Hong) of the Eastern Jin was the founding master of gold leaf forging, and among gold-beating households the tale that “the immortals made gold leaf” has always circulated; in former times the gold beaters of Longtan all worshipped Ge Xianweng and burned incense through the four seasons. According to veteran craftspeople, the earliest gold beaters in Nanjing were all from Longtan, drawn from the three great surnames Liu, Ge and Yin: the Lius beat gold leaf, the Ges cut gold leaf, and the Yins made gold thread. The Nanjing Gold Thread and Gold Leaf General Factory is the protecting unit for the project. The gold leaf forging industry of Nanjing originated in the area around Longtan Garden in Qixia District, which formerly belonged partly to Jurong County and partly to Jiangning County. The earliest written record of the gold leaf production technique appears in Tiangong Kaiwu (The Exploitation of the Works of Nature) by Song Yingxing of the Ming dynasty: “In making gold leaf, once the metal has been beaten into thin sheets, it is wrapped in black gold paper and struck with all one’s might using a mallet (the gold-beating mallet has a short handle and weighs about eight jin).” Nanjing gold leaf is an outstanding representative of traditional hand craft. At present the Nanjing Gold Thread and Gold Leaf General Factory in Longtan Subdistrict, and the Jiangning Gold Leaf Group, which moved to Jiangning in the 1980s, are still engaged in the trade.

02 · Mastery & Signature Works

The bearer record for Ge Caijin is anchored in the documented technical standards of Nanjing Gold Foil Forging Craftsmanship in Nanjing, Jiangsu. Within the documented technical tradition of Nanjing Gold Foil Forging Craftsmanship in Nanjing, Jiangsu: According to legend, Ge Xianweng (Ge Hong) of the Eastern Jin was the founding master of gold leaf forging, and among gold-beating households the tale that “the immortals made gold leaf” has always circulated. Ge Hong was a native of Xiayin, north of the county town of Jurong. In former times the gold beaters of Longtan all worshipped Ge Xianweng, burning incense through the four seasons and kneeling before him at New Year and festivals; beside the incense table they would also place a mallet, praying that the god would keep their beating smooth and successful. According to veteran craftspeople, the earliest gold beaters in Nanjing were all from Longtan, drawn from the three great surnames Liu, Ge and Yin: the Lius beat gold leaf, the Ges cut gold leaf, and the Yins made gold thread. Before the founding of the People’s Republic of China, there were gold leaf workshops all around Longtan, at Liuziqiao and Siduanwei and elsewhere: the men beat gold leaf and the women wove brocade thread. Nanjing gold leaf is forged from pure gold through more than ten process steps — pouring the bar, drawing the bar, beating the leaf, making the wick, opening the packet, loading the tool kit, the great beating, issuing the leaf, cutting the gold leaf, inspection and packing — of which the beating is the most arduous: a lump of gold must be beaten into a sheet about 0.1 micron thick. Two people beat face to face, and the blows must number tens of thousands. Folklore has it that the gold leaf beaten from one liang of gold can cover one mu and three tenths of land. Scientific measurement shows that 943 sheets of gold leaf are only one millimetre thick, and that ten thousand sheets weigh just 178.125 grams — from which the refinement of the beating technique can be seen. Today the brilliance of Nanjing gold leaf shines in temples throughout China as well as in the Moscow China Hotel, the Thai royal palace, the Osaka gateway in Japan and the presidential residence in Zaire; and much of the gold leaf used in food, cosmetics, architecture, craft and decoration is the work of Nanjing craftspeople. Representative repertoire, works and technical entries recorded for the project include: "Archival Record of Process Steps": Nanjing gold leaf is forged from pure gold through more than ten process steps — pouring the bar, drawing the bar, beating the leaf, making the wick, opening the packet, loading the tool kit, the great beating, issuing the leaf, cutting the gold leaf, inspection and packing — of which the beating is the most arduous: a lump of gold must be beaten into a sheet about 0.1 micron thick. "The goldsmith's calls": Beating, planishing, lifting, ageing and burnishing are each given a name, and the whole is judged by the hands until the leaf is thin enough. "The Liu, Ge and Yin families": Three Dragon Pool surnames divided the work — Liu beat, Ge cut, Yin drew the wire — until markets gradually reunited the trades in one family. "The immortals made the foil": The gilders keep a hammer on the altar and honour Ge Hong the Immortal all year, asking his favour for a good beating.

Archival Record of Process Steps

Nanjing gold leaf is forged from pure gold through more than ten process steps — pouring the bar, drawing the bar, beating the leaf, making the wick, opening the packet, loading the tool kit, the great beating, issuing the leaf, cutting the gold leaf, inspection and packing — of which the beating is the most arduous: a lump of gold must be beaten into a sheet about 0.1 micron thick.

The goldsmith's calls

Beating, planishing, lifting, ageing and burnishing are each given a name, and the whole is judged by the hands until the leaf is thin enough.

The Liu, Ge and Yin families

Three Dragon Pool surnames divided the work — Liu beat, Ge cut, Yin drew the wire — until markets gradually reunited the trades in one family.

The immortals made the foil

The gilders keep a hammer on the altar and honour Ge Hong the Immortal all year, asking his favour for a good beating.

03 · Transmission & Safeguarding Status

In 2025, Ge Caijin was announced in the sixth batch of national representative bearers for Nanjing Gold Foil Forging Craftsmanship, with Nanjing, Jiangsu as the declared area. Within the documented safeguarding record of Nanjing Gold Foil Forging Craftsmanship in Nanjing, Jiangsu: The project was inscribed in the national inventory in 2006 (batch 1), with Nanjing, Jiangsu as its declared area, and Nanjing Jinxianjinbozong Factory as its safeguarding unit. Since the project was inscribed in the national inventory, its declared area and safeguarding unit have carried out documentation, transmission and presentation within the national safeguarding framework. Together, the inventory record and the project archive form the public documentary basis for the bearer’s transmission practice.

04 · Associated Heritage Item Dossier

Historical origin

The gold leaf forging industry of Nanjing originated in the area around Longtan Garden in Qixia District, which formerly belonged partly to Jurong County and partly to Jiangning County. The earliest written record of the gold leaf production technique appears in Tiangong Kaiwu (The Exploitation of the Works of Nature) by Song Yingxing of the Ming dynasty: “In making gold leaf, once the metal has been beaten into thin sheets, it is wrapped in black gold paper and struck with all one’s might using a mallet (the gold-beating mallet has a short handle and weighs about eight jin).”

Declared area
Nanjing, Jiangsu
Safeguarding unit
Nanjing Jinxianjinbozong Factory
Inscription batch
Batch 1 (2006)
Item code
Ⅷ-36
Category
Traditional Craftsmanship

05 · Fellow National Bearers Lineage

National representative bearers recorded under the same item code, ordered from the first to the sixth batch. Batch order is not a teacher–student relationship.

BearerDeclared areaRoster codeRelation
Wang BishengNanjing, Jiangsu03-1314Same declared area
Ge CaijinNanjing, Jiangsu—This page

06 · Archival Sources & Bibliography

  1. Gecaijin (Nanjing, Jiangsu) · China ICH Official Project Archive
  2. Gecaijin · China ICH Official Archive

This static English edition is rendered at the edge for search engines, AI crawlers and readers without JavaScript. Compiled from official national representative bearer archival records and the associated project dossier, organized by topic and translated into English. 阅读中文版。